Description:
The smallest of BP Solar's SX module series, the photovoltaic module BP Solar SX10U operates DC loads with small to moderate energy requirements. With 36 multicrystalline cells in series, they generate nominal maximum power of 10 watts respectively, efficiently charging 12 V batteries in virtually any climate. Best Performance definite by BP Solar's quality design and workmanship. The BP Solar SX 10U solar module has a clear universal frame and robust junction box.
Quality & Safety
| |
• |
Manufactured in ISO 9001 and ISO 14003 certified factories |
|
| |
• |
Conforms to European Community Directive 89/33/EEC, 73/23/EEC and 93/68/EEC |
|
| |
• |
Certified to IEC 61215 |
| |
ESTI certified
Module power measurements calibrated to World
Radiometric Reference through ESTI (European Solar
Test Installation at Ispra, Italy)
IEC certified
Framed modules certified by TÜV Rheinland as Safety
Class II (IEC 60364) equipment for use in systems up
To 1000VDC for BP SX 10U
Class C certified
Framed modules listed by Underwriter’s Laboratories for
Electrical and fire safety (Class C fire rating)
NEC Class 1 certified
Approved by Factory Mutual Research in NEC Class 1,
Division 2, Groups A, B, C & D hazardous locations (BP SX 10U)
Typical characteristic
| Electrical data |
|
| |
|
| Maximum power [Pmax] |
10W |
| Warrented minimum power |
9W |
| Voltage at Pmax [Vmp] |
16.8V |
| Current Pmax [Imp] |
0.59A |
| Short-circuit current [Isc ] |
0.65A |
| Open-circuit Voltage [Voc] |
21.0V |
| Maximum series fuse rating |
600V |
| Maximum system voltage |
1000V |
| |
|
| Standard test conditions - irridiance of 1000W/m2 at an AM1.5G solar spectrum and a temperature of 25°C |
| |
|
| |
|
| Temperatures & coefficients |
|
| |
|
| Temperature coefficient of Isc |
(0.065 ± 0.015) %/K |
| Temperature coefficient of Voc |
-(80 ± 10) mV/K |
| Temperature coefficient of Pmax |
-(0.5 ± 0.05) %/K |
| NOCT |
47 ± 2°C |
| |
|
| Standard test conditions - irridiance of 1000W/m2 at an AM1.5G solar spectrum and a temperature of 25°C |
| |
|
| |
|
| Performance |
|
| |
|
| Rated power |
10W |
| Nominal voltage |
12V |
| Warrenty |
90% power output over 12 years |
| |
Free from defects in materials and workmanship for 2 years |
| |
|
| Mechanical chraracteristics |
|
| |
|
| Dimensions |
424 x 273 x 50 [mm] [± 3mm tolerance over all] |
| Weight |
1.9kg |
| Frame |
Clear adonised aluminium, alloy type 6063T6
Silver universal frame |
| Solar cells |
36 cells |
| Dimensions solar cells |
57 x 38 [mm] |
| Configuration solar cells |
geometrically for a 4 x 9 matrix connected in series |
|
Junction box |
IP54 junction box with 6 terminal screw connection block
accepts PG 13.5, 13mm conduit or cable fitting
Terminal accepts up to 6 mm2 (10 AWG) wire |
| Output cables |
RHW AWG# 18 (0.75 mm2) 2 core PLTC cable |
| Lengths output cables |
457mm |
Construction
|
Front: high transmission 3mm tempered glass
Rear: Blue tedlar; Encapsulant: EVA |
| |
|
| |
|
| Qualifikation test parameters |
|
| |
|
| Temperature cycling rate |
-40°C to + 80°C for 200 cycles |
| Damp heat test |
85°C and 85% relative humidity for 1000h |
| Front and rear static load test (eg. wind) |
2400 Pa |
| Front load test (eg. snow) |
5400 Pa |
| Hailstone impact test |
25mm hail at 23 m/s from 1m distance |
| |
| |
Possible applications
• 12 V applications
• All commercial applications
• Remote telemetry
• Instrumentation,
• Sensors
• Signals
• Mini home-solar systems
• Consumer and leisure articles
|
Off-Grid Solar Panels
Kyocera
